179 replies to this topic

[aastes]

Dear fellow Ausloters

I welcome all who are interested to offer up their tracks in order to host a round in the 2009 GT DUPR

As mentioned in the regs we are looking for tracks with 3 lanes or more and PC timing control

Each car should complete at least 12 minutes spread in equal heats across all lanes

I look forward to hearing from you

Cheers

Edited by aastes, 18 August 2008 - 04:50 AM.

[espsix]

I'll put my hand up for a round.


cheers
brett

[hoffy]

After a years lay off, I'd like to put up my track for consideration this year:

Track Name - Six Pines Raceway
Contact details
Track address

Track length - 16.7M
Number of lanes - 4
Track surface - MDF with Enoch Grey Ferrador
What voltage do you intend running at? - 12
Software used - SRM
Is the track magnetic - No

[Imkouwl]

I would also like to be a host for the 2009 DUPR

I will give full details later but very similar to Hoffys track just faster

Edited by Imkouwl, 18 August 2008 - 09:23 AM.

[Imkouwl]

Details include
4.1.1 Track surface: MDF with Enoch Grey Ferrador
4.1.2 Number of lanes: 4
4.1.3 Power supply/voltage: DSE 25AMP 12V variable (running at 12Volts)
4.1.4 Software used: SRM


Track length

Lane1 Lane2 Lane3 Lane4
20226mm 20226mm 20225mm 20225mm

Grove depth: 8mm
Grove width: 3mm
Out side Braid width: 16mm
Braid: Tinned copper braid recessed 0 to 0.5mm below track surface.

[kalbfellp]

I will nominate Shelmore Park again next year.
Happy to run on 12 volts.

Trakmate Windows Version
Ferrodoe coated with Cabots Clear ( Boslot finish)
Tinned Copper braid.
Must measure it! 20 metres I think.
9 to 18.8 variable. Amps plenty!

Also I am sure John Batich would be happy to have a round at Stratton Valley again,he is away in Italy at present so could not run around this year.


Trakmate Windows Version
Satin Enamel
Copper tape
17 metres
9 to 18.8 variable. Amps plenty!

All the tracks down here in Hobart run Trakmate software Windows version.
All run the same variable suppies.

Edited by kalbfellp, 19 August 2008 - 12:40 PM.

[BMR]

I will offer my track again for a round in 2009 ( Beachside Model Raceway )

[imugford]

Sorry, not this year. Outer Limits Raceway is packed up at the back of the shed, with the 1:1 Valiant in there.

[aastes]

My track is in:

Woodlands Raceway
21 metres
non magnetic
Ferrador surface
three lanes
Non magnetic braid

[oswald900]

Ill put my hand up even though the track is still being built

[aastes]

We are up to eight tracks so far - fantastic response guys

[boss302]

I would like to nominate Gotham Park Batcave here in Tassie - as used for this year's event. I will post an updated pic and full details when I get a minute.

[datto16]

If Brad doesn't want to nominate for the northern end of Tassie.......

I can do it at my place...

Track should be going by the weekend....


Possum Park...
Three lanes, copper tape....
Semi gloss Enamel surface.....
Lane length, somewhere around 15 to 17 metres ( cant be more precise until i measure it properly
Happy to run 12 volts (probly will anyway)
Trackmate (windows version) timing..

Edited by datto16, 20 August 2008 - 11:24 AM.

[espsix]

That looks great datto16!

Looks like we may need to have more than 10 rounds?
(i'm not saying we will, that will be up to Steve!!)

[aastes]

Any tracks in NSW or Queensland available for a round in 2009?

[hoffy]

How are you going to determine who hosts a round?

[terry]

I'd be happy to host a round but I haven't got the track started,and although it will be running by christmas,its still a bit away yet.

3 lane wood ,variable power,magnabraid,some sort of timing system,some type of track surface.

Sorry.

Terry

[kalbfellp]

Come on Terry: Thought you would have it finished by now! It only took me two years to build my new track!

Phil

[rick1776]

Dont we have any plastic tracks nominated?? Have I done my dough buying the MB Slot Dodo motor?

cheers
rick1776

[kalbfellp]

Quote

Dont we have any plastic tracks nominated??