Dupr Round 10, Woodlands Now 2nd August... Options

[aastes]

I feel more comfortable moving the date forward one week as I expecting ( but not hoping for ) call from Pommieland any day now telling me I'll have to go there at a days notice for family reasons

So New date is Saturday 30th July

So I'll ask for offers of help again please

This way if I get the call we have a weeks extra time to sort through date

Plus I get to race V32 if I don't get the call

This post has been edited by sidecar steve: Jul 31 2008, 08:09 PM

[aastes]

Geez wheres my head - Meant Saturday 2nd August NOT Wednesday ( thanks for pointing out my brain fade)

[espsix]

I'm in Steve.
I may be able to rustle up another drive/marshal, i'll let you know.

[aastes]

I'm in Steve.
I may be able to rustle up another drive/marshal, i'll let you know.

Help please yes

[espsix]

send me you details and what time you want me there.

[aastes]

Cars arrived safe and sound this morning

All being well I shall get qualifying done late tonight - if not it will definately be done tomorrow during the day.

So you have a guide as to lap times the fastest to date round my track has been a 6.910 sec by a Slot It Jag which as just about equalled by a box standard Ninco Porsche 997 (on standard tyres) with a 6.921

Through the Speed trap the fastest has been Slot. It cars recording 16.98kph across the start/finish line (compared to my V32 V8 Ford which never gets faster than 13.8 kph - mid 7's) so it will be interesting to see what these Sports Sedans throw up. One things for sure - the fastest cars don't always set the quickest laps as the Porsche runs in the low 15s for kph whilst I have a Scaley Jag Gt which again never reaches 14 kph yet will lap happily in the very very low 7's just tad slower than the fastest lap

As usual PK has supplied the cars all tidy and prepped

If there is anyone out there wanting me to check screws etc on there cars please PM me else they will be run 'as is'

This post has been edited by aastes: Jul 29 2008, 11:37 AM

[sidecar steve]

Hi Steve, as discussed, I will be available for marshalling duties.

[espsix]

See you Saturday Steve, and Steve.

[kalbfellp]

I hope I have set the cars up the way they should be. I did check them all when they arrive and a few body screws needed sorting,some were almost falling out!

Phil

[pitlane3]

Hi Brett,
was planing to get to your place on Friday evening,
just read all this, I may come to Steve instead,
and lent a hand.
I call you before Friday.

Christian

[aastes]

Qualifying all done

This post has been edited by aastes: Jul 30 2008, 01:15 AM

[aastes]

Qualifying all done


Sprints car in dry dock cos the guide mount broke after travelling less than 30cm

Shall write up notes/reasons/what ifs and publish them later today

In the mean time results show best lap and top speed across start/finish line. As can be seen the top two place getters were streets in front in both time and speed.

The main reason cars lost time was their inability to take the loop fast enough. This effected some more than others ( McGregors, Scar plus Hellraisers and ESPSIX so God knows what times latter two would have done if I could get them quicker over the bridge)
The top 16 cars went quicker than anything I had achieved before

Anyway more notes later

This post has been edited by aastes: Jul 30 2008, 01:12 AM

[smallnails]

wow.........what a difference a round makes!

[aastes]

wow.........what a difference a round makes!

Some cars you can tell will keep lapping at the same speed lap after lap whilst others will give good times from Banzai laps. Yoours falls into the former so will move up - however it was another of the cars thatdidn't like the reverse camber over the bridge.

[BMR]

Just a reminder - my car had a body screw that would work loose , it would be a good idea to drop in a bit of platicine or a bit of tape over the screw hole , just to be sure the screw doesn't end up in the slot and harming someone elses car accidentially . If you feel like doing it - a little bit of silicone in the thread hole , left to dry and take up the excess space in the thread hole may fix that screw loosening problem , I will leave it up to your judgement if its within the rules , I don't want any advantage , I just wouldn't like to see someone elses car loose there flag or worse breaking their chassis by hitting a screw lodged in the slot .
Hope you can get Sprints car going again - I think that one has been fixed a few times now ?

[aastes]

Just a reminder - my car had a body screw that would work loose , it would be a good idea to drop in a bit of platicine or a bit of tape over the screw hole ,

Already done

As for Sprints - still waiting for the fix to set

[kalbfellp]

BMR The screw did fall out down here and I used some more resin in the rear holes.

phil

[BMR]

BMR The screw did fall out down here and I used some more resin in the rear holes.

phil

Cheers Phil , Thanks for that . I thought to bring up the loose screw thingy again because I would hate for someones car to be put out of the Proxy because of it . The guilt would kill me - then again if it was one of the 18 cars above me in the qualifying shoot out , my guilt may not run as deep as it probably should

[aastes]

Updated qualifying with Sprints car included - boy he must be happy so far


Note whilst positions are the same there was a small error in one lap time - this has been corrected

[aastes]

OK - rather than go through the whole "your handles like this" or it handles like that I thought I would just show pictorial statistics of sorts







As for chassis used - listed are whether the chassis was solid (motor and rear axle form part of the chassis) or independant of the chassis ie in a pod mounted style
POS. DRIVER
1st ESPSIX SOLID
2nd Sprint PODDED
3rd Hellrais PODDED
4th magoo SOLID
5th bitman SOLID
6th devious PODDED
7th sidecar PODDED
9th antony SOLID
8th Oswald SOLID
10th sportrac SOLID
11th imugford SOLID
12th aastes PODDED
13th kalbfell PODDED
14th mannimal SOLID
15th gazza SOLID
16th fangio PODDED
17th McGregor SOLID
18th scar SOLID
19th old slot SOLID
20th BMR SOLID
21st MANIC35 SOLID
22nd Newso PODDED
23rd HMCSAT SOLID
24th smallnai SOLID
25th imkouwel SOLID
26th Mopardev PODDED
27th eno SOLID