wwwace Posted March 8, 2021 Report Share Posted March 8, 2021 Looking for wheel inserts for a 1/24 Lotus 23. Especially the front ones. Diameter not smaller then 15mm would be good. Any luck ? Many thanks. Cheers Werner Quote Link to comment Share on other sites More sharing options...
charlesx Posted March 8, 2021 Report Share Posted March 8, 2021 Think Dart Hobbies in Canada has these in 15mm size but they could be for 15inch 1/32 wheels. Check their website. Pattos also has a good range. Regards Chas Le Breton Quote Link to comment Share on other sites More sharing options...
munter Posted March 11, 2021 Report Share Posted March 11, 2021 I have some in a 1/24 size but cannot confirm for a day or so.... away from my parts bins/ home at the moment Quote John Warren Slotcars are my preferred reality Link to comment Share on other sites More sharing options...
wwwace Posted March 12, 2021 Author Report Share Posted March 12, 2021 ....That would be great. Whenever you are ready....... Quote Link to comment Share on other sites More sharing options...
munter Posted March 13, 2021 Report Share Posted March 13, 2021 I have these but can only muster 13.5mm diameter. I do have the four bump versions but in a 1/32 size. Quote John Warren Slotcars are my preferred reality Link to comment Share on other sites More sharing options...
wwwace Posted March 13, 2021 Author Report Share Posted March 13, 2021 Yes, these would be nice for the rear. But I do need them in a 15.0mm diameter for the 1/24 Lotus 23. It is the fronts what I am really after as it is a different design. Quote Link to comment Share on other sites More sharing options...
munter Posted March 13, 2021 Report Share Posted March 13, 2021 I would say finding the fronts in 15 mm would be a challenge. Maybe talk to someone who is handy with the 3D printer Quote John Warren Slotcars are my preferred reality Link to comment Share on other sites More sharing options...
Kevan Posted March 16, 2021 Report Share Posted March 16, 2021 On 3/13/2021 at 7:12 AM, munter said: I would say finding the fronts in 15 mm would be a challenge. Maybe talk to someone who is handy with the 3D printer The printing is the easy bit, those compound curves aren't easy to 3D CAD, I did some 6 spokers with a passing resemblance on the track. I may have to fire the CAD up and have a go. 1 Quote Life is like a box of Slot cars... Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.