Oldskool62 36 Report post Posted January 12 I have always loved the George Fury Nissan Bluebird since the first day it raced. Yes I am a V8 nut but there was something about this car. Does anyone know of a resin body for this car in 1/32? I'd love to add it to my Aussie race car collection. Cheers Quote Share this post Link to post Share on other sites
Vinno 156 Report post Posted January 13 9 hours ago, Oldskool62 said: I have always loved the George Fury Nissan Bluebird since the first day it raced. Yes I am a V8 nut but there was something about this car. Does anyone know of a resin body for this car in 1/32? I'd love to add it to my Aussie race car collection. Cheers I have spotted a 3D printed Skyline a while ago on one of the facebook slotcar groups but not resin. Can’t recall if it was that model or the previous one though. More and more 3D stuff popping up at the moment just need more work than a resin body. Also I think Nimrod who pops in here every now and then said he had details for a 3D Nissan but I could be wrong. Quote Share this post Link to post Share on other sites
Oldskool62 36 Report post Posted January 13 (edited) 1 hour ago, Vinno said: I have spotted a 3D printed Skyline a while ago on one of the facebook slotcar groups but not resin. Can’t recall if it was that model or the previous one though. More and more 3D stuff popping up at the moment just need more work than a resin body. Also I think Nimrod who pops in here every now and then said he had details for a 3D Nissan but I could be wrong. @Vinno Thanks for this.I'll keep an eye out for Nimrod. I got on to a guy who is looking into it. I really liked the George Fury Car. Edited January 13 by Oldskool62 Quote Share this post Link to post Share on other sites
mus-28 6 Report post Posted January 14 North BRIS Slots have branched out into 3D printing and have a huge list of cars they are able to print. Message them on Facebook, they have another page that is just related to 3D printing on Facebook "NBS3d Printed Slot Car Bodies, Parts and Accessories" 1 Quote Share this post Link to post Share on other sites
Oldskool62 36 Report post Posted January 14 (edited) 5 hours ago, mus-28 said: North BRIS Slots have branched out into 3D printing and have a huge list of cars they are able to print. Message them on Facebook, they have another page that is just related to 3D printing on Facebook "NBS3d Printed Slot Car Bodies, Parts and Accessories" @mus-28Thanks very much for this. I will make contact with them and let you know. Just made contact and its looking really promising. Edited January 15 by Oldskool62 Quote Share this post Link to post Share on other sites
Oldskool62 36 Report post Posted January 15 @mus-28no go on the Bluebird so back to the drawing board. Quote Share this post Link to post Share on other sites
mtpanorama 18 Report post Posted January 31 Probably not what you want to pay for one but they are around. No bids at the moment so maybe make a cheeky offer, or see they can supply an unpainted body only. https://www.ebay.com.au/itm/Scalextric-Ford-Holden-vs-84-Nissan-Bluebird-current-Grp-C-lap-record-G-Fury/184634134462?hash=item2afd0d4fbe:g:iqoAAOSwFxlgDNjW 1 Quote "If you tell a lie big enough and keep repeating it people will eventually come to believe it." Joseph Goebbels 1984 was a warning, not an instruction manual. Share this post Link to post Share on other sites
Oldskool62 36 Report post Posted January 31 @mtpanorama thanks for this. Definitely on the high side and while I appreciate the work gone into it . I'd like one a little straighter. Quote Share this post Link to post Share on other sites
rosco01 126 Report post Posted February 1 Ouch..... rarity often drives the price up.... Have you checked with the two great casters in this forum OS-62... I expect you have..... but.... frats, Rosco Quote Share this post Link to post Share on other sites
NimROD444 37 Report post Posted February 25 Hey All, Yes I have a bluebird 3d model, I post a pic to make sure it's the car your thinking of. If you have a printer, your welcome to it, if not, I can print it but, it will be a couple of weeks. Cheers NimROD Quote Share this post Link to post Share on other sites
Oldskool62 36 Report post Posted February 26 @NimROD444 I shot you off a PM. Quote Share this post Link to post Share on other sites
NimROD444 37 Report post Posted February 27 Hey Oldskool62, Found this real nice model, can be modified too. CHeers NimROD Quote Share this post Link to post Share on other sites
Oldskool62 36 Report post Posted February 27 @NimROD444That looks like a pretty good starting point. Flairs and so forth and the George Fury beast will come to 1/32 life. Quote Share this post Link to post Share on other sites
NimROD444 37 Report post Posted June 7 Hey Oldskool, Apologies it's taken so long, I had a few projects in front of it. Finally, we can see the light at the end, a couple more hours and it should be ready for you. Any feedback would be greatly appreciated. Cheers NimROD 6 Quote Share this post Link to post Share on other sites
Oldskool62 36 Report post Posted June 7 @NimROD444Looks spot on. Well daone. Quote Share this post Link to post Share on other sites
Vinno 156 Report post Posted June 7 That’s nice another addition to the Group C cars. Quote Share this post Link to post Share on other sites
Wobble 130 Report post Posted June 8 Yep, I had to hit the 'like' button on that one too. Quote Share this post Link to post Share on other sites
kalbfellp 84 Report post Posted June 8 Looking great Vlad. My Prusa prints has been busy with bodies both in 1/32 and 1/24 for Dave. Quote Phil Hobart Miniature Car Club Tassie Resins Email Share this post Link to post Share on other sites
Shaynus 64 Report post Posted June 8 Looks fantastic! Top work there! Quote Share this post Link to post Share on other sites
NimROD444 37 Report post Posted June 8 Thank you all, And then last night I found a $15.00 version that looks better than mine HAHAHAHAHAHA It's lot thicker though going through and putting the panel line on, then it will be ready Couple more days @Phil, please send m some pics, Dave's build of the Shadow MKII was just beautiful, got to see more. BTW, which car do you guys want next? Only if it is too hard to find Cheers NimROD 1 Quote Share this post Link to post Share on other sites
Oldskool62 36 Report post Posted June 8 3 hours ago, NimROD444 said: Thank you all, And then last night I found a $15.00 version that looks better than mine HAHAHAHAHAHA It's lot thicker though going through and putting the panel line on, then it will be ready Couple more days @Phil, please send m some pics, Dave's build of the Shadow MKII was just beautiful, got to see more. BTW, which car do you guys want next? Only if it is too hard to find Cheers NimROD @NimROD444I would like to see one of the Alpha's that ran in Bathurst. Also an XR & XT Falcon, which I cannot find at all. Quote Share this post Link to post Share on other sites
kalbfellp 84 Report post Posted June 9 I have just printed a 68 Falcon found the file on 3d printables. Needs a bit of detailing but will be an XT in. Few weeks, also an HR to do a Blue one raced by a famous Bathurst champion. Quote Phil Hobart Miniature Car Club Tassie Resins Email Share this post Link to post Share on other sites
Shaynus 64 Report post Posted June 10 On 6/8/2021 at 9:17 PM, NimROD444 said: Thank you all, And then last night I found a $15.00 version that looks better than mine HAHAHAHAHAHA It's lot thicker though going through and putting the panel line on, then it will be ready Couple more days @Phil, please send m some pics, Dave's build of the Shadow MKII was just beautiful, got to see more. BTW, which car do you guys want next? Only if it is too hard to find Cheers NimROD Kevin Bartlett's "channel 9" Camaro, with full body kit please! Quote Share this post Link to post Share on other sites
Oldskool62 36 Report post Posted June 10 19 hours ago, kalbfellp said: I have just printed a 68 Falcon found the file on 3d printables. Needs a bit of detailing but will be an XT in. Few weeks, also an HR to do a Blue one raced by a famous Bathurst champion. @kalbfellpPhil can you put me down for one please. The icing on the cake for my collection. Now to hunt the XR. Quote Share this post Link to post Share on other sites
Oldskool62 36 Report post Posted June 10 4 hours ago, Shaynus said: Kevin Bartlett's "channel 9" Camaro, with full body kit please! @Shaynus Just bought one off John Shultz on Facebook a few weeks ago. Pretty good print. 1 Quote Share this post Link to post Share on other sites
