lenny broke Posted December 31, 2020 Report Share Posted December 31, 2020 (edited) Hi Guys' Here's a Spec Sheet for all the cars in this years series. Please post or PM your car specifications and I will update the sheet on a regular basis. Cheers, Alan Edited March 7, 2021 by lenny broke updated 07Mar21 Quote home track club racer Spitfire Raceway forum link https://www.facebook.com/groups/1753319218331240/?ref=bookmarks Link to comment Share on other sites More sharing options...
Brumos RSR Posted December 31, 2020 Report Share Posted December 31, 2020 (edited) Sharknose Ferrari Scalextric Samson Classic (DSC) Slotting plus MrSlotCar Pinion Slot It gear Paul Gage tires, RSslot f/r wheels Edited December 31, 2020 by Brumos RSR Quote Link to comment Share on other sites More sharing options...
charlesx Posted January 20, 2021 Report Share Posted January 20, 2021 (edited) Hi Lenny/Alan. My Brabham BT3 will much the same as last 3 years or so but will be fitted with new SRP16000 FF050 motor and new PG rear tyres. I hope to also re-build the front axle mount so it will be eligible for FPR building competition. Hopefully also tidy up Stubbo's original paint job. Spec. details are as follows: 1963 Brabham BT3 driven by the late Denny Hulme (No. 5); entry country - New Zealand; body STUBBO including paint job as far as I know; chassis Le Breton with BWA motor mount; motor SRP16000; guide - Slot-it; pinion BWA; crown wheel - Slot-it; gear ration - TBD; rear tyres PG21083; wheels - F&R - BWA; Regards Chas Le Breton Edited January 20, 2021 by charlesx Quote Link to comment Share on other sites More sharing options...
lenny broke Posted January 29, 2021 Author Report Share Posted January 29, 2021 Updated 29 -01-21 add #5 details add Sticks to entry Quote home track club racer Spitfire Raceway forum link https://www.facebook.com/groups/1753319218331240/?ref=bookmarks Link to comment Share on other sites More sharing options...
Peter Gunn Posted January 29, 2021 Report Share Posted January 29, 2021 Peter Gunn no 14 Lotus 24 B.R.M P/P body Beardog chassis , Tassie 1790 motor, MRRC guide, Slot it pinion, Slot it crown wheel, gear ratio 9x24, rear tyres Yellowdog compound, Rear wheels RS, Front wheels RS. Dixie no 16 Lotus 24 B.R.M P/P body, Beardog chassis , SRP 18 K Motor, MRRC guide, Slot it pinion, Slot it crown wheel, gear ratio 10x 24, rear tyres Yellowdog compound, Rear wheels RS, Front wheels RS. Quote Link to comment Share on other sites More sharing options...
lenny broke Posted February 3, 2021 Author Report Share Posted February 3, 2021 Spec sheet update 03feb21 Quote home track club racer Spitfire Raceway forum link https://www.facebook.com/groups/1753319218331240/?ref=bookmarks Link to comment Share on other sites More sharing options...
lenny broke Posted February 7, 2021 Author Report Share Posted February 7, 2021 Spec sheet update 08feb21 Quote home track club racer Spitfire Raceway forum link https://www.facebook.com/groups/1753319218331240/?ref=bookmarks Link to comment Share on other sites More sharing options...
sdeamon Posted February 8, 2021 Report Share Posted February 8, 2021 mjk wheels and tyres 9/25 9/24? slotit GearinG SRP 16 3RD YEAR slotit PLUS GUIDE I THINK Quote Link to comment Share on other sites More sharing options...
lenny broke Posted February 10, 2021 Author Report Share Posted February 10, 2021 Spec sheet update 10feb21 Quote home track club racer Spitfire Raceway forum link https://www.facebook.com/groups/1753319218331240/?ref=bookmarks Link to comment Share on other sites More sharing options...
lenny broke Posted February 16, 2021 Author Report Share Posted February 16, 2021 Spec sheet update 10feb21 Quote home track club racer Spitfire Raceway forum link https://www.facebook.com/groups/1753319218331240/?ref=bookmarks Link to comment Share on other sites More sharing options...
Stubbo Posted February 27, 2021 Report Share Posted February 27, 2021 Hi Lenny, Here are the details of the Gippsland Cars CAR Entrant Car Body Chassis MOTOR Guide Pinion Gear Gear Tyre Wheels Wheels # Make Make Make Ratio Make front rear Rear 2 Stubbo Brabham Climax SBW Stubbo Tasman 1790 NSR Scalex Slot It 9:24 Gage BWA BWA 41 Plugger Brabham Climax SBW Slo1quick Tasman 1790 NSR Scalex Slot It 9:24 Gage BWA BWA 66 Sainter Brabham Climax SBW Slo1quick SRP 18 NSR BWA Slot It 9:23 Gage BWA BWA Quote Alan Stubbings Link to comment Share on other sites More sharing options...
lenny broke Posted February 28, 2021 Author Report Share Posted February 28, 2021 Spec sheet update 28feb21 Quote home track club racer Spitfire Raceway forum link https://www.facebook.com/groups/1753319218331240/?ref=bookmarks Link to comment Share on other sites More sharing options...
charlesx Posted March 2, 2021 Report Share Posted March 2, 2021 (edited) Hi Lenny and all. The Bruce and Denny show is finally on the road to AUS. Details for both cars are as follows: Please note there are a few minor changes to Brabham BT3. Brabham · Name: Charles Le Breton, charlesx, ID. CX1 on bottom of car. · Contact details: charlesx@xtra.co.nz, 0276400504NZ · Number Preference(s) No.3 as allotted. · Car Details BWA wheels, Dart front tyres and PG21083 rear tyres, MRRC pinion and NSR contrate. Gear ratio 10:24, SRP18000 motor. Total weight 57.10gms. · Car make and model 1963 Brabham BT3 as raced at Pukekohe by Denny Hulme in Tasman Cup. · Body Manufacturer - Stubbo including paint job. Sorry Stubbo car is a little knocked around after several years on road. · Chassis type and manufacturer name Self made with BWA engine mount and piano wire rails, brass rod for steering, suspension arms, springs, exhaust from engine then a brass tube exhaust pipe, black coated plastic wire for hydraulic hoses. Separately rotating front wheels with brass tube axle, Thunderslot guide, decals paint and engine detail by me Cooper Climax · Name: Charles Le Breton, charlesx, ID. CX2 on bottom of car. · Contact details: charlesx@xtra.co.nz, 0276400504NZ · Number Preference(s) No 5 as originally allotted to my Brabham. · Car Details - Self made with BWA engine mount and brass rod rails, brass rod for steering, suspension and springs. Brass tube for exhausts. BWA pinion, Slot-it contrate, gear ratio 9:23, BWA 14000 motor. Total weight 56.85gms. · Car make and model 1962 T60 Copper-Climax as raced by Bruce McLaren in Tasman Cup. · Body Manufacturer 6-7 years ago I think by Phil from Tasmania. Preparation, paint and decals by me. · Chassis type and manufacturer name - Self made with BWA engine mount and brass rod rails, suspension and springs. brass tube exhausts and front axle tube. Slot-it guide plus decals paint and engine detail by me. Please advise if I have missed anything. Sorry cannot add photos so am sending to Lenny. Cars sent today. Regards Chas Le Breton (charlesx) Edited March 2, 2021 by charlesx Add weight of cars. Quote Link to comment Share on other sites More sharing options...
lenny broke Posted March 7, 2021 Author Report Share Posted March 7, 2021 Spec sheet update 07Mar21 Quote home track club racer Spitfire Raceway forum link https://www.facebook.com/groups/1753319218331240/?ref=bookmarks Link to comment Share on other sites More sharing options...
pmdaniels Posted April 2, 2021 Report Share Posted April 2, 2021 Car 15 has has had a motor change , now running a SRP 18k and a 9 tooth pinion . Quote PeterD Link to comment Share on other sites More sharing options...
charlesx Posted April 7, 2021 Report Share Posted April 7, 2021 HI Lenny. Rear tyres are PG20183 and all wheels are BWA on my T60 Cooper Climax. Regards Chas Le Breton Quote Link to comment Share on other sites More sharing options...
PeterG Posted July 5, 2021 Report Share Posted July 5, 2021 Hi Alan, Any chance of an update on the spec sheet? I'm keen to see what the runaway leader has under the body. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.