toast 2 Report post Posted November 7 hey all , yup open the bad and all fell out and can't find a single grub screw, i am running 32nd scale rims and just need to know the size of the grub screws so that can get some more cheers in advance Quote Share this post Link to post Share on other sites
Vinno 64 Report post Posted November 7 From what I can see on the internet the screws are M2 but they take an odd size Allen key. Might be best just using a standard M2 Slot.it grub screw. If you have any see if they fit. Only issue with the Slot.it is they are 2mm standard but I usually swap for 3mm. Good luck. Quote Share this post Link to post Share on other sites
toast 2 Report post Posted November 7 cheers pal Quote Share this post Link to post Share on other sites
SlotsNZ 107 Report post Posted November 7 Depends on which wheels you have - the more recent offerings are M2.5 - those products would have a product code ending in H25. Earlier ones are just M2. I've not encountered anything unusual about the fit of the hex key tip. So in either case, the standard products used by other makers like Slot.it/Sideways - or by Slotting Plus, will fit whichever size wheel hole you have. Just nick some off another unused car in the meantime if you don't have spares in "the war chest" At least that enables you to continue setting up the car. Quote My Track Oakland Raceway V2 HMBRC Club Website Share this post Link to post Share on other sites
