Jump to content
knoath

DG Raceway

Recommended Posts

I have just come back to slot cars after about a decade and I'm building my 3rd routed track.
This time a 2 laner as it's really only family having some fun, mostly myself and my oldest, now 18.
So on to the build...
Measuring approx 5.4m X 2.2m (almost 18' X 7')
I'm not sure of lane lengths.
Lane spacing varies.
Scenery work and scratch built buildings.
The table is built on castors for ease of movement so I can work from all sides.

I used 3mm MDF around the edge to get an idea of the shape of the edging.

post-24462-0-89421000-1600298628.jpg

post-24462-0-91586000-1600298769.jpg

Then I used cardboard sheets to get an idea of the height of the edging. Thumb tacks used to pin it to the frame.

post-24462-0-67110300-1600298840.jpg

Once happy, I used 6mm MDF for the edging, but around the tighter curves I used 2 layers of 3mm.

post-24462-0-68046300-1600298950.jpg

I had used plaster to form the scenery base, but I really don't like using it so I sourced some Sculptit from Officeworks for the more detailed top layer which is much better to work with.

To form the base layer I used cheap 'CHUX type cloths, cut into strips, soaked in plaster then layed on to flyscreen which I stapled to the track edge.

post-24462-0-81573900-1600298994.jpg

Playing around with 3mm ripple strips. we have run a few laps with them just placed on the track to see where they might interfere with the cars.

post-24462-0-50697700-1600299058.jpg

Edited by knoath
  • Like 1

Cheers,

Dick

 

SCMR build thread

Woodbrook Valley build thread

 

"A Man's home is his castle, but his garage is his sanctuary!"

Share this post


Link to post
Share on other sites

I masked the edging ready for the mess of painting and adding grass to the terrain.

post-24462-0-26788700-1600299628.jpg

Lowndes approaches Skyline...

post-24462-0-95764900-1600299781.jpg

These catch fences are just in situ... just seeing how they look. More concrete fencing to go in, I'm waiting for more sculptit to become available to continue with scenery.

post-24462-0-83998500-1600299837.jpg

 

Edited by knoath
  • Like 1

Cheers,

Dick

 

SCMR build thread

Woodbrook Valley build thread

 

"A Man's home is his castle, but his garage is his sanctuary!"

Share this post


Link to post
Share on other sites

Looking good, you have been busy! How long has this been cooking?

What surface paint did you go for, looks a bit speckled?


Share this post


Link to post
Share on other sites

Thanks Fellas.

Bry, we moved 4 years ago and during the move the cars and power supply were stored in a shed. My son saw them and said it was a waste to have them in boxes so that planted a seed!

I have a 9x8m garage so room wasn't an issue! ;)

The surface is just some grey misstint from Bunnings, then a misting of matt black and ivory white spray cans... I quite like it.... and it doesn't smell like Ferradore!


Cheers,

Dick

 

SCMR build thread

Woodbrook Valley build thread

 

"A Man's home is his castle, but his garage is his sanctuary!"

Share this post


Link to post
Share on other sites

Having run some laps, I'm finding the grip is nothing like the Ferrodore of old... however, I am running cars as they were when they were put away around 8 years ago, maybe longer.

I managed to true the tyres a bit more on a Ninco Mosler and that has helped a lot, so it looks like I'll be going through my stock of MJK's and slowly working through my cars, glueing and truing.

Looking to add timing as soon as I can find a suitable, cheap PC.

 


Cheers,

Dick

 

SCMR build thread

Woodbrook Valley build thread

 

"A Man's home is his castle, but his garage is his sanctuary!"

Share this post


Link to post
Share on other sites

For many here who may not know. When I got into modern slots at the end of 2006, I found SCI first, then a month later Auslot forum. I was in steep learning curve mode, as we founded the Hawkes Bay club.
I took a few trips to Oz, going to Sydney  to meet the Australian Ninco/Fly/various brands distributor who helped us get started with our first track - 100 foot Ninco, meet some good guys in Sydney like Tooter who took me to a private racing group in North Sydney, met Cathy at Armchair, - Jim was away in hospital, met Roland at SlotShop Sydney, where I have raced a few times on the old Artin track, and in Melbourne (point of epistle), hooked into the V32 group, and some other guys who raced at Geds. 

So it is great seeing some of that old crew back here on forum again, as I have sweet memories of being trotted around Melbourne by the Scrivvies, Stubbo, Eno et all in 2007 and 2008.
So any contribution I make here, we have V32 guys in particular to thank for help, inspiration etc.
Knoath's was the nicest scenic track I visited.

I have raced on Knoaths old track, and those of a few other tracks of the original V32 club guys who are on here. 
Stayed on occasion with Eno at Dandenong, who also took me to meet Peter at MRSlotCar, and stayed with Stubbo out by Phillip Island when he and Eno hosted me for a weekend of Historics racing.

Share this post


Link to post
Share on other sites

Aw, shucks mate, kind words... Thank You.

I have a miniscule amount of knowledge of slot cars and racing (just go through the V32 results pages :D) but what I did learn when I entered the hobby was that there are some awesome people involved who would (and did for me) go well out of their way to welcome and encourage newbies.

It's one of the reasons why I came back... good times, better people.

But you all know that.

 

 


Cheers,

Dick

 

SCMR build thread

Woodbrook Valley build thread

 

"A Man's home is his castle, but his garage is his sanctuary!"

Share this post


Link to post
Share on other sites

nice rolling hills Dick, looks lovely, needs cows :)


Cheers Grant

20191120172309-193d8f3b.gif.......................................................20170306174707-b4015afe.gif

Home Track..........Corvette C1 Build..........McLaren M1A Build..........Maserati 300S Build..........Allard J2 Build..........50's Diner..........Iso Griffo A3C

 

3D Printed Adjustable Chassis..........3D Print Projects

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...