mattcrackers 73 Report post Posted July 13, 2020 I have a 3D printed chassis that came with the Nissan 3D printed body. I have tried the various motors I have at home here but none will fit. Here's a few pics of the chassis to see if someone here would know what type of motor I'm after. Seems to be the length of a long can motor except the hole nearest the rear axle is different. Any help is much appreciated. cheers Matt Quote Share this post Link to post Share on other sites
Shaynus 37 Report post Posted July 15, 2020 SCX motor?? Quote Share this post Link to post Share on other sites
mtpanorama 5 Report post Posted July 15, 2020 The hole at the rear axle end looks like a standard mabuchi endbell holder but if there is room for a long can then you might need a spacer like some of the Scalextric cars used to put a mabuchi in a johnson motor holder. Quote "You must always strive to be the best but you must never believe that you are." Juan Manuel Fangio "Political correctness is fascism pretending to be manners." George Carlin Share this post Link to post Share on other sites
mattcrackers 73 Report post Posted July 20, 2020 Cheers for the input fellas. I did find a motor on Ebay that will fit the dimensions of the motor mount holes but they are not in stock from all sellers, long can 22150 RPM 12V. Might have to see if I can find myself some adapters,spacers to use but I do believe Shane has printed a chassis that suits the Nissan. Matt Quote Share this post Link to post Share on other sites
Shaynus 37 Report post Posted July 21, 2020 You mean something like this...? Quote Share this post Link to post Share on other sites
mattcrackers 73 Report post Posted July 21, 2020 That's the one, lol, does it come in black. Nice work Shane, have you give it a run yet? Quote Share this post Link to post Share on other sites
Shaynus 37 Report post Posted July 22, 2020 I'm currently "developing" one for the VE shell and that's in black as that is what is in the printer. Done a handful of test laps. Seems to go OK. Hopefully the blue chassis will be used in anger on Friday, if I can tweak it in time for a mate to use under a Falcon body. It is similar to what I put under my proxy Audi, so that should be an acid test! Quote Share this post Link to post Share on other sites