Jump to content
Stubbo

2019 Tasman Cup Tech Details

Recommended Posts

I did the tech inspection on the cars I had over the weekend.

 

If you can please help fill in the gaps here that would be great.

 

I still have to do the Tassie Cars and diffinty.

 

hhxkgy0.jpg

 

l3lsfms.jpg


Alan Stubbings

Share this post


Link to post
Share on other sites

Gage, Pendle f/r, 9/24, MrSlot Car, DSC chassis, Tas1790, Scalextric body, Slotting plus guide

Edited by Brumos RSR

Share this post


Link to post
Share on other sites

Scaleauto guide, betta body, gage rears, psr wheels, motor up to srp 18k.


My mum says I'm an excellent driver

Share this post


Link to post
Share on other sites

Hi Alan

 

The missing details for my car are: Wheels RS; Gear Ratio 9:23; Motor SRP 18k; Body Mitcham/Warren; Guide TSRF. I don't know what the urethane rear tyres are, I found them my collection and they seemed to work but I don't know where they're from.

 

Best Regards

 

David

Share this post


Link to post
Share on other sites

My missing details are; Paul Gage tyres front and rear, 9:24 gear ratio, SRP16 motor, Tassie resin body

 

Sorry, these details should have been included in the box,

 

Terry

Share this post


Link to post
Share on other sites

Hi Alan, missing details

MJK rims front and rear

Slot it pinion

No offset

Tassie resins

 

Paul


Try Harder, if you dont fail your not trying hard enough

Share this post


Link to post
Share on other sites

Thanks Chaps.

 

Nearly there.

 

I'll do the other measurements on the weekend and then post up an amended set of specs.

 

I'm trying to work out a date for the first race. I'll let you know ASAP.


Alan Stubbings

Share this post


Link to post
Share on other sites

hi 9/24 925???? gear tassie body srp 16 motor brokespeed 4 chassis PS WHAT IS THE TASMAN 1790 MOTOR

 

That is the motor Phil gets in from China in bulk lots on the list of eligible motors for the series Cheese

Share this post


Link to post
Share on other sites

Hi Stubbo. My car is identical to 2 years ago apart from new tyres although it is certainly showing its age. Hope to build a new car for next year. Will try to recall details.

 

Brabham BT3 No. 5 - Tyres front Dart; tyres rear PG XPG; wheels front and rear BWA; gearing 9:23 I think; pinion MRRC; contrate Slot-it offset; chassis self; motor SRP 16; body Stubbo I think (you will know); guide Ninco sprung I think - otherwise Slot-it.

 

Hope this is of some help. Looking forward to racing even if my car is rather past it.

 

Regards Chas Le Breton

Share this post


Link to post
Share on other sites

Hi Stubbo, Here are the missing details for the Elfin :

Tyres - Rear: MJK, Front: BRM hard classic

Wheels F & R - MJK

Ratio - 9 : 25

Guide - Revo Slot

Body - Tassie

Cheers, John

Edited by John FPR7

Share this post


Link to post
Share on other sites

Hi Stubbo, missing details for the Honda:

 

Tyres - Rear: MJK, Front: MJK

Wheels F & R - MJK

Ratio - 9 : 24

Guide - Slot.it

Body - Tassie

Chassis - Brokespeed

Motor - SRP 18 (well was :-o)

 

Cheers, Chris

Edited by Mondeo74

Share this post


Link to post
Share on other sites

Thanks for information Chris. What on earth did you do to that motor that it would fail completely. Perhaps it just has some muck in it. Electric motors should not fail completely unless brushes/commutator or windings damaged.

 

Hope you can fix.

 

Regards Chas Le Breton (charlesx)

Share this post


Link to post
Share on other sites

Have no idea, just standard running in on low Volts. Curious to find out any further info From the stage organisers if there are any indications as to what may have happened

Share this post


Link to post
Share on other sites

Re #20. The car started ok but just progressively slowed down and started emitting smoke and came to a halt after a couple of laps.

 

I have replaced the motor with another SRP 18.

 

Also I noted the diameter of the crown was 14.32. I do have a list somewhere but not handy just now. Could somebody please check and see what slot.it offset crown has a 14.32 diameter? Thanks


Alan Stubbings

Share this post


Link to post
Share on other sites

I confirm that there were no modifications to car #20, it was based on the build specs

Edited by Mondeo74

Share this post


Link to post
Share on other sites

Hi Stubbo. Sounds like Mondeo's motor might have been over-oiled. Perhaps a good clean out with Fuelite will fix. Normally these motors only need a light oil on bearing end and nothing on brush end as it is so easy to over oil.

 

Regards Chas Le Breton (charlesx)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...