←  Workshop

Auslot Forums

»

Endbell Drive Sidewinder Motor Pods

Caddo's Photo Caddo 07 Jan 2019

G'day

Any one know of a source for Mabuchi motor, end bell drive sidewinder pods, similar to the old Slot It classic car pods? They are all can drive pods now.

3D printed is ok.

Cheers Caddo
Quote

big den's Photo big den 07 Jan 2019

hi Caddo,

What a coincidence!

I've been trying to find the same thing ... see my posts in the 'New Products' thread.

The ones I thought I'd found were made by Devis 3D Designs but are now out of production AFAIK.

LEB Hobbies website lists them but the illustrations of 'endbell drive pods' don't have the large D-shaped mounting hole where the endbell of an S-Can would snap in.

If you have any Fly cars that are sidewinders with pods you'll see what I mean ... the endbell of the motor (and the large D-shaped mounting) is near the left hand rear wheel.

I would be happy to buy some from the US if I be sure I was getting the right thing.

Den
Quote

Caddo's Photo Caddo 10 Jan 2019

All the 1/32 sidewinder pods I can find seem to be can-end drive now unfortunately
Quote

big den's Photo big den 10 Jan 2019

You're right Caddo.

BUT ... I am still having discussions with LEB regarding the pictures of the Devis S-can pods.
I'm hoping that it's just the pictures on the website that are incorrect and that there really are end-bell drive pods available.

The point I've made to LEB and have mentioned in the other thread, is that Fly, SRC, Scalextric etc end-bell drive cars all have the larger D-shaped mounting hole closest to the left-hand rear wheel ... obviously because that's where the end-bell is positioned.

I'll keep you posted on any feedback that I get.

Den
Quote

Caddo's Photo Caddo 11 Jan 2019

Great! thank you very much! Hoping there is an option there.
Slot It aren't interested in producing any of their old end bell drive sidewinder pods
Quote

lenny broke's Photo lenny broke 12 Jan 2019

Not wishing to open the floodgates on Pandora's tin of worms, but why the preference for endbell drive pods?
Quote

big den's Photo big den 12 Jan 2019

G'day Alan

Not sure what Caddo's motivation is but for me it's just about building 'fun cars' without having to spend big money on motors e.g I can buy a Scalextric S-Can (endbell drive) for less then half the price of (for example) a Slot.It double-shaft motor.

Think back to the Jag Challenge in NZ where the object was to recycle 30-year-old Scalextric cars.

I also buy quite a bit of S/H stuff and quite often the motors and the rear axle assemblies are OK even though other components might be beyond salvage.

And harking back to Munter's thread about cost versus fun, one of the cars I ran at Phil's last Tuesday was a Scalextric Escort Mk 1 rally car with two lady drivers. Because the original rear wheels were so far out of line I was actually running 50-y-o Formula Junior wheels on the car.

Boss302 was quick to notice ... maybe because it was so slow!

Den
Quote

Caddo's Photo Caddo 13 Jan 2019

I'm converting my Scaley cars to 3D printed chassis with sidewinder pods, and want to keep the original Scaley motors.
All the Scaley motors I have are end bell drive with a single shaft.
I'm looking for end bell drive pods top suit the motors.
Quote

lenny broke's Photo lenny broke 17 Jan 2019

Thanks chaps
I wasn't thinking in terms of Scalex motors going in, makes sense
cheers

Alan
Edited by lenny broke, 17 January 2019 - 07:45 PM.
Quote

big den's Photo big den 17 Jan 2019

Thanks for your continuing interest in this topic Alan.

When it comes to cars that are unlikely to be competitive I'm not a believer in the concept of 'shelf queens'.

So I'm happy to build and run a few 'track queens' but I don't want to spend a fortune in doing so.

I'm also interested in the FF 3D motor pods also because the cost of building a 'track queen' can be reduced even further by using the very cheap FF motors.

Den
Quote

lenny broke's Photo lenny broke 18 Jan 2019

I hear ya Den,
I have a collection of SCX RX42 motors that I've swapped out for something quicker over the years that I'd like to use. I also have quite a few resin bodies that aren't suitable for club racing, so I'm aiming to scratch build some chassis' and use those motors to power them.
Cheers,
Alan
Quote

Caddo's Photo Caddo 18 Jan 2019

With the 3d chassis revolution, it's a bit short sighted of Slot It not to produce the end bell drive pods IMO
Quote

kalbfellp's Photo kalbfellp 31 Jan 2019

I think I may have solved Dennis's problem.

Posted Image

Posted Image
Quote

Caddo's Photo Caddo 31 Jan 2019

Nice work Phil,

Will you make these available for purchase via your website?
Quote

kalbfellp's Photo kalbfellp 01 Feb 2019

Caddo Lets see how they go in testing first.
Quote