David Carter 98 Report post Posted March 3, 2018 (edited) Branco 1968 Chevrolet Camaro Bryan Thomson #17 on the grid chassis 3D printed fitted with slot it long can pod pioneer guide fitted with soft braid NSR lead wire Body Poineer plastic stock plastic windows custom paint/livery motor/gearing NSR baby king set up inline slot it 9/28 wheels/tyres CB designs wheels 15x10 rears - 15x7 fronts NSR supergrips rears - superglued coated fronts weight 102g Edited March 19, 2018 by David Carter Quote Holdens rule the rest just drool slot cars are my drug, ATCC/Bathurst proxy host NZ Grp5 proxy host. Share this post Link to post Share on other sites
ZeGas 73 Report post Posted March 4, 2018 Nice paint job there, Those gears seem very short, are there a lot of tight tracks in this proxy. Quote Cheers Grant ....................................................... Home Track..........Corvette C1 Build..........McLaren M1A Build..........Maserati 300S Build..........Allard J2 Build..........50's Diner..........Iso Griffo A3C 3D Printed Adjustable Chassis..........3D Print Projects If life gives you lemons, take them, free s#!t is cool. Share this post Link to post Share on other sites
branco 57 Report post Posted March 4, 2018 Zegas, I'd like to come up with something technical to say about my choice of gearing but at the end of the day it's the only gear I had spare lol. Quote 2019 NZ RTR Nationals Gt 3rd 2017 NZ RTR Nationals NSR Classic 2nd 2017 NZ RTR Nationals Group C 3rd 2017 NSR Classic Challenge 3rd 2015 NSR Classic Challenge 2nd 2014 NSR Classic Challenge 3rd 2015 Garden City Invitation Overall Champion Share this post Link to post Share on other sites
Sports Racer 145 Report post Posted March 4, 2018 (edited) No chassis photo or are you going to wait until all entries have been received? I'd like to change my entry from the XB Falcon to a similar looking Chev to branco's. I figure if it looks rough the drivers won't mind pushing it harder than a concourse entry. Edited March 4, 2018 by Sports Racer Quote May the downforce be with you. Share this post Link to post Share on other sites
branco 57 Report post Posted March 4, 2018 Luv it Quote 2019 NZ RTR Nationals Gt 3rd 2017 NZ RTR Nationals NSR Classic 2nd 2017 NZ RTR Nationals Group C 3rd 2017 NSR Classic Challenge 3rd 2015 NSR Classic Challenge 2nd 2014 NSR Classic Challenge 3rd 2015 Garden City Invitation Overall Champion Share this post Link to post Share on other sites
Sports Racer 145 Report post Posted March 4, 2018 Team rat Chev? Quote May the downforce be with you. Share this post Link to post Share on other sites
David Carter 98 Report post Posted March 5, 2018 man what did you run that into at full speed Quote Holdens rule the rest just drool slot cars are my drug, ATCC/Bathurst proxy host NZ Grp5 proxy host. Share this post Link to post Share on other sites
shadow_rusty 42 Report post Posted March 5, 2018 man what did you run that into at full speed Maybe it was the XB falcon that he can no longer enter?? Quote Stolen from SlotsNZ Team ABC Team Leader (Ambitious, But Crap) Home Track Threads - Shadow's Semi-Permanent Layout & Another Rug Racer & Proud of It & Gymkhana Test Track Car Collection Thread - My Car Collection Charts / Diagrams - MJK Tyre Selector / Slot.it 4wd Gearing / PoliCar Rollout / Rollout Chart Generator / SCX 4wd Rollout / Track Wiring with Brake on Track Call Share this post Link to post Share on other sites
difinity 27 Report post Posted March 5, 2018 I’m not gluing bits back in that fall off in transit or on my track. Might be lucky to get the chassis back too... Quote Share this post Link to post Share on other sites
ZeGas 73 Report post Posted March 5, 2018 Can you get 1:32nd scale duct tape? Quote Cheers Grant ....................................................... Home Track..........Corvette C1 Build..........McLaren M1A Build..........Maserati 300S Build..........Allard J2 Build..........50's Diner..........Iso Griffo A3C 3D Printed Adjustable Chassis..........3D Print Projects If life gives you lemons, take them, free s#!t is cool. Share this post Link to post Share on other sites
Sports Racer 145 Report post Posted March 5, 2018 It's been in one too many enduro's. Don't worry about the weight loss advantage, it's more than offset with the amount of dirt covering it. Quote May the downforce be with you. Share this post Link to post Share on other sites
ZeGas 73 Report post Posted March 5, 2018 OK, got the proxy I think. Was looking for the ATCC but think I have stumbled upon the Demo Derby proxy. Better go find a 10 storey building to drop my entry from. Just to be competitive like. Quote Cheers Grant ....................................................... Home Track..........Corvette C1 Build..........McLaren M1A Build..........Maserati 300S Build..........Allard J2 Build..........50's Diner..........Iso Griffo A3C 3D Printed Adjustable Chassis..........3D Print Projects If life gives you lemons, take them, free s#!t is cool. Share this post Link to post Share on other sites
ZeGas 73 Report post Posted March 6, 2018 (edited) Not as "classic" as the previous photos, maybe next year. This is my entry for this years ATCC - Class B. Will replace braid & clean tyres & body, then it's off to Aotearoa. 3D printed chassis Motor Pioneer Typhoon 18k Guide Sloting Plus universal Rear axle Slot.it Rear Rims Slot.it 15” rims Rear Tyres MJK 20x10 18.00 Bushes Scalextric Nylon Gears Pinion Slot.it 5.5mm 10T Crown Slot.it 26T Front Axle Unbranded Rims Slot.it 20x10 Tyres Dunno Final weight 94gms Edited March 6, 2018 by ZeGas Quote Cheers Grant ....................................................... Home Track..........Corvette C1 Build..........McLaren M1A Build..........Maserati 300S Build..........Allard J2 Build..........50's Diner..........Iso Griffo A3C 3D Printed Adjustable Chassis..........3D Print Projects If life gives you lemons, take them, free s#!t is cool. Share this post Link to post Share on other sites
David Carter 98 Report post Posted March 9, 2018 look forward to it's arrival Quote Holdens rule the rest just drool slot cars are my drug, ATCC/Bathurst proxy host NZ Grp5 proxy host. Share this post Link to post Share on other sites
David Carter 98 Report post Posted March 9, 2018 (edited) Munter Ford GTHO on the grid Chassis brass/paino wire scaleauto guide slot it braid Body Munter resin lexan windows lexan interior tray with resin driver & steering wheel custom livery Motor/Gearing 17k NSR Baby king 9/24 slot it inline Wheels/Tyres 15x8 slot it rear & 15x6 on front independents NSR supergrips on the rear urethane on front Edited March 9, 2018 by David Carter Quote Holdens rule the rest just drool slot cars are my drug, ATCC/Bathurst proxy host NZ Grp5 proxy host. Share this post Link to post Share on other sites
David Carter 98 Report post Posted March 9, 2018 Munters car is one beautifully built and presented slot car just as we would expect for one of our top scratch builders I can only hope mine is just as good Quote Holdens rule the rest just drool slot cars are my drug, ATCC/Bathurst proxy host NZ Grp5 proxy host. Share this post Link to post Share on other sites
munter 166 Report post Posted March 9, 2018 I can only hope mine is just as good I think it will be after seeing the body work last night and having that quick drive on Mac's track. Rear tires on my car are supergrips and fronts are urethane, Quote John Warren Slotcars are my preferred reality Share this post Link to post Share on other sites
David Carter 98 Report post Posted March 9, 2018 I can only hope mine is just as good I think it will be after seeing the body work last night and having that quick drive on Mac's track. Rear tires on my car are supergrips and fronts are urethane, ok cool Quote Holdens rule the rest just drool slot cars are my drug, ATCC/Bathurst proxy host NZ Grp5 proxy host. Share this post Link to post Share on other sites
jimmyslots 1950 41 Report post Posted March 10, 2018 (edited) Volvo headed across the ditch should be there next week,last testing was not too good with timber spray glue surface making the old girl turn turtle a lot but before that was ok on not sprayed surface.Think that's enough excuses for upcoming poor performances but I'm sure I'll find more. Body.............SCX BROCK VOLVO Chassis........Slot it Lancia Motor............Sideways Baby Raptor 17 K Guide...........Scaleauto Gears..........Slot it 11:26 Rear tyres ....NSR Supergrip Front tyres....Slot it sealed & polished. Weight..........98 gms Cheers Jimmy Edited August 15, 2018 by jimmyslots 1950 Quote To finsh first,first you gotta finish Share this post Link to post Share on other sites
David Carter 98 Report post Posted March 12, 2018 (edited) Dave Carter Ford GTHO Bill Brown Chassis brass & piano wire fitted with slot it long can inline pod slot it wood guide with 1mm trimmed off of the bottom edge slot it soft braid Body Munter resin with Bill Brown livery lexan interior,resin driver custom made roll cage lexan windows custom made front spoiler motor/gearing Nsr baby king inline set up 9/28 slot it gears slot it lead wires Wheels/tyres slot it 15x8 alloys on the rear fitted with NSR ultrgrips slot it 15x8 plastic on the front fitted with urethanes with superglue coating Munter resin inserts weight 117g hope it doesn't end up like the real one did with it's back broken upside down on a fence but if you are going to wipe out you might as well do it properly Edited March 19, 2018 by David Carter 1 Quote Holdens rule the rest just drool slot cars are my drug, ATCC/Bathurst proxy host NZ Grp5 proxy host. Share this post Link to post Share on other sites
ZeGas 73 Report post Posted March 12, 2018 Mate that is one awesome build, absolutely beautiful handiwork. We have a Concours winner already me thinks, got my vote anyway. How did Bob not get split in half by the fence, the rest of the car did and his helmet seemed to nudge it too. 1 Quote Cheers Grant ....................................................... Home Track..........Corvette C1 Build..........McLaren M1A Build..........Maserati 300S Build..........Allard J2 Build..........50's Diner..........Iso Griffo A3C 3D Printed Adjustable Chassis..........3D Print Projects If life gives you lemons, take them, free s#!t is cool. Share this post Link to post Share on other sites
David Carter 98 Report post Posted March 12, 2018 How did Bob not get split in half by the fence, the rest of the car did and his helmet seemed to nudge it too. how about the guy that nearly got taken out I bet his tight'y whitey's weren't quite so white afterwards Quote Holdens rule the rest just drool slot cars are my drug, ATCC/Bathurst proxy host NZ Grp5 proxy host. Share this post Link to post Share on other sites
terry 52 Report post Posted March 12, 2018 (edited) Finished off the #33 falcon today ready to go in tomorrows post Edited March 12, 2018 by terry Quote Share this post Link to post Share on other sites
slotmadmac 208 Report post Posted March 12, 2018 Dave Carter Ford GTHO Bill Brown That looks great Dave. I can't wait to see this car in the flesh. Quote Podiums are for short people. Share this post Link to post Share on other sites
Wobble 143 Report post Posted March 13, 2018 My Mum used to say "corker". A couple of corker XY's from the Bay. Quote Share this post Link to post Share on other sites
