Jump to content
Sign in to follow this  
wwwace

Regulations 1/24 Modern Gt

Recommended Posts

2016 REGULATIONS 1/24 MODERN GT

1.0 BODY

1.1. Only GT Bodies made from Hard Plastic, Resin or GFK as listed within the official

1/24 Modern GT Car body list are allowed.

1.2. Body is to be presented as close as possible to the 1:1 original GT car. No major

body parts are allowed to be missing.

1.3. Clear Lexan windows and light covers can be used.

1.4. Lightweight rear wings (Lexan, Carbon etc.) can be used however these must

reflect the 1:1 original in dimensions and mounting positions.

1.5. Flexible wing mounts can be used as long as shape and size correspond to the

1:1 original.

1.6. Vacuum formed driver interiors with separate resin or hard plastic driver heads

can be used. The interior must cover the entire body inside so that no chassis

parts are visible.

1.7. A car specific roll cage or parts of it has to be used.

1.8. All air intake openings larger then 5mm have to be covered. Mesh can be used.

1.9. Flexible aftermarket mirrors can be used.

1.10. Body and interior has to be painted. Race numbers and race liveries are

required.

1.11. Fantasy liveries in the spirit of 1:1 motor sport (modern GT Racing,) are

permitted.

1.12. Minimum body weight including body mounts is 45.0 g .

2.0 CHASSIS

2.1. Only fully commercially available adjustable (wheelbase, width and ground

clearance) Model Car Racing Chassis and components such as manufactured by

Plafit, Motor Modern, Schoeler, M-Racing, Slotvision, Metris, Solid, Do-Slot, Werk,

Slotline, Speedslot, V-Tec, NDW etc.

2.2. Chassis has to be adjusted according to the body and its dimensions making sure

that all wheels are covered by the body when viewed from above.

2.3. All original mounting points and basic configuration must be retained.

2.4. Minor chassis modifications within its design limits allowed (for example reducing

of main chassis plate width for proper body fitment, T-Plate modifications for front

wheel clearance etc.).

2.5. DoSlot 13D Motorbox Kit can be used for Plafit 1800SLPJ (SLP2) Chassis.

2.6. Aftermarket Carbon and/or Aluminum replacement parts are allowed as long as

they are commercially available.

2.7. No soldering permitted to hold motor into position.Only motor screws can be used.

2.8. No traction magnets.

2.9. Body tape or plastic strip may be used to hold lead wires in place.

2.10. Additional weight may be added on top or around the chassis.

2.11. Maximum main chassis plate width is 78.0mm.

3.0 GROUND CLEARANCE

3.3. 1.0mm under the entire chassis including gear.

4.0 FRONT AXLE

4.1. Any 3mm. Independent front axles allowed.

4.2. Any 3mm axle oilites or axle ball bearings allowed.

5.0 FRONT WHEELS

5.1. Any Aluminum front wheels with a minimum diameter of 21mm can be used.

5.2. Sakatsu Brake Discs (2100) are to be used with all Sakatsu wheels.

5.3. 3D Wheel Inserts in modern GT design have to be used.

5.4. Any Hard Sponge Tires sealed or non-sealed can be used.

5.5. Minimum tire and rim width is 6mm.

5.6. Minimum tire diameter is 25mm.

5.7. Maximum front spur width is 85.0mm but never wider then the body.

6.0 REAR WHEELS

6.1. Any Aluminum rear wheels with a minimum diameter of 21mm can be used.

6.2. Sakatsu Brake Discs (2100) are to be used with all Sakatsu wheels.

6.3. 3D Wheel Inserts in modern GT design have to be used.

6.4. Maximum tire and rim width is 16mm.

6.5. Minimum tire diameter is 26mm.

6.6. Maximum rear spur width is 86.0mm but never wider then the body.

6.7. Plafit Black Magic Rear Tires (8441BM or 8442BM) and Scaleauto ProComp3

Tires are allowed only.

6.8. Use of Goo and/or any other tire softener, liquids etc. is not allowed. Cleaning with

Tape or Shellite only is permitted.

7.0 REAR AXLE

7.1. Any 3mm.

7.2. Any 3mm axle oilite bushings or axle ball bearings can be used.

8.0 GEARS

8.1. Any plastic 50 pitch spur gears for 3mm axles.

9.0 PINION

9.1. Any 50 pitch.

10.0 MOTOR

10.1. Only 13D 8635 Fox IV Motor only.

10.2. Original lettering on the motor can has to be visible.

10.3. Sealed Motors are not to be opened or modified in any way.

10.4. Any lead wire.

11.0 WEIGHT

11.1. Minimum total car weight is 160g.

 

1/24 MODERN GT CARS

Official Body Homologation List 2016

 

ASTON MARTIN

Aston Martin DB9R (GFK, Carrera white Kit and complete Slot Car)

 

AUDI

Audi R8 LMS (GFK, Scaleauto white Kit and painted Bodies,

Carrera white Kit and complete Slot Car)

 

BENTLEY

Bentley Continental (GT3 GFK, Resin)

 

BMW

BMW M3 GT2 (GFK, Scaleauto white Kit and painted Bodies)

BMW Z4 GT3 (GFK, Scaleauto white Kit and painted Bodies,

Fujimi Model Kit)

 

BUGATTI

Veyron (GT2) (GFK, AutoArt complete Slot Cars)

 

CHEVROLET

Camaro GT3 (GFK, Resin)

Corvette C5R / C6R / C7R (GFK, Carrera white Kit and complete Slot Car,

Revell Model Kit)

 

DODGE

Viper GTS (Revell / Monogram Model Kit)

SRT Viper GTS-R (Scaleauto white Kit and painted Bodies, GFK)

 

FERRARI

Ferrari F430 GT2 (Fujimi Model Kit (needs rear wing)

Ferrari 458 GT2 (GFK)

Ferrari 575 GTC (Carrera white Kit and complete Slot Car)

Ferrari P4/5 Competizione (GFK)

Ferrari F70 LaFerrari (Tamiya Model Kit)

Ferrari FXX (Tamiya Model Kit)

Ferrari 599XX (Carrera white Kit and complete Slot Car

 

FORD

Ford GT3 (GFK, Simil'R Model Kit)

 

GILETT

Gilett Vertigo GT3 (GFK)

 

GINETTA

Ginetta GT3 (GFK

 

GUMPERT

Gumpert-Apollo R (GFK, Cartronic complete Slot Car)

 

HONDA

HSV (GFK)

 

JAGUAR

XKR GT-2 (Scaleauto white Kit and painted Bodies)

 

LAMBORGHINI

Murcielago GT1 (GFK, Aoshima Model Kit)

Gallardo GT2 (GFK, Fujimi Model Kit (needs rear wing)

Aventador LP-400 (Fujimi, Aoshima Model Kit (needs rear wing)

Huracan GT3 (GFK)

 

LOTUS

Esprit GT300 (GFK)

 

MARCOS

Marcos LM600 GT2 (GFK)

 

MASERATI

Maserati MC12 GT1 (GFK)

 

McLAREN

McLaren MP4-12 GT3 (GFK, Fujimi Model Kit)

 

MERCEDES

Mercedes SLS GT3 (GFK, Scaleauto white Kit and painted Bodies,

Fujimi Model Kit, Carrera complete Slot Cars)

 

MOSLER

Mosler MT900 GT2 (GFK)

 

NISSAN

Nissan GT-R R34 (Tamiya Model Kit)

Nissan 350Z (Tamiya Model Kit)

Nissan GTR GT3 (GFK)

 

PAGANI ZONDA

Pagani Zonda R + GT1 (GFK)

 

PANOZ

Panoz Esperante GT1 (GFK, Carrera white Kit and complete Slot Cars)

 

PORSCHE

Porsche 996 / 997 RS (GT3 GFK, Scaleauto white Kit and painted Bodies,

Carrera white Kit and complete Slot Cars)

Porsche Cayman CSR (GFK)

 

SALEEN

Saleen S7 GT1 (GFK)

 

SPYKER

Spyker C8 GT2 (GFK)

 

TOYOTA

Supra GT (Tamiya Model Kit)

 

TVR

TVR GT3 (Resin)

 

VENTURI

Venturi Heritage GT3 (Resin)

 

 

 

18.12. 2015

Note : This list does not claim to be complete.

Changes and updates will be made if necessary.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×
×
  • Create New...