Jump to content
Sign in to follow this  
wwwace

Regulations 1/32 Sideways Group 5

Recommended Posts

2016 Sideways GROUP 5 REGULATIONS

 

AXLE FRONT:

1. Original front axle.

2. Must be located in the original, un-modified front axle holders.

3. Side play may be adjusted by adding axle washers.

4.Wheels must be inside the guards.

 

AXLE REAR:

1.Original rear axle bushings only, NO ball bearings.

2. The offset axel holders can replace the standard that come in the car as these parts are with the car as spare options.

3. Side play may be adjusted by adding axle washers.

4.Wheels must be inside the guards.

 

BODY:

1.Only the original unmodified Group 5 anglewinder chassis is allowed.

2.Rear wings must be mounted on the body in the original position before the start of the race. Rubber supports can be added to prevent wings from breaking off. Must be in original position.

3.If the rear wing comes detached during the race, it must be re-attached before the next bracket.

4.The windows must remain original and in place at all times.

5.The body must not be altered in any way. Light scrape is allowed to stop body catching on chassis.

6. All the body screws must be in place. Any screws may be used.

7. Painted liveries are allowed making sure all the parts are used and numbers have to be in at least 3 places on the car.

 

CHASSIS:

1.Only the original unmodified sideways group 5 anglewinder chassis is allowed.

2. Adding weight to any part on top of the chassis inside the car is allowed.

3. Reinforcing or gluing parts of the chassis such as axle bushings, motor mounting post is allowed.

4. NO MAGNETS.

5. Opening screw holes to stop screws from catching is aloud.

6. Light scrape is aloud of chassis to stop body catching

 

GEARS:

1.Original Slot.It YELLOW 28T anglewinder gear.

2.Original Slot.It 11T pinion.

 

GROUND CLEARANCE:

1. Day light must be seen.

 

GUIDE:

1.Any Slot.It replacement guide.

2.Any lead wire.

3.Any braid.

 

INTERIOR:

1.Original unmodified interiors must be in place at all times.

 

MOTOR:

1.Original unmodified 20,500rpm Slot.It motors only. They are Slot-it motors that are released in sideways cars.

2.The motor wrapper has to be in tact, otherwise it will be disqualified.

3. Note the first lot of Capri cars were released with a open can both sides .These motors are still rated with the same everything to what comes in the sideways cars to date.

Anyone wishing to replace a motor can use the 20,500rpm Slot-it motor part number MN0O9CH. Motor label must be on.

 

WHEELS/TYRES FRONT:(NO SILICON TYRES.)

1.Only original Slot.It tyres are permitted.

2.Sanding gluing and truing is allowed.

3.Tyres must touch on set up board when checked.

4.Original rims only.

 

WHEELS/TYRES REAR:(NO SILICONS TYRES.)

1.FOAM TYRES ONLY. SLOT IT/NSR PART NUMBERS 9024 AND 9025/SCALEAUTO SC-2009P

2.Sanding gluing and truing is allowed.

3.TYRE TREATING, CONDITIONING OR SOFTENING IS NOT ALLOWED.

Cars allowed to be used are :

Ford Capri Turbo

Porsche 935

BMW 320

BMW M1

LANCIA BETA MONTECARLO

Ferrari 512BB Group 5

Ford Mustang Turbo Group 5

Lancia Stratos Group 5

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×
×
  • Create New...