Jump to content
Sign in to follow this  
wwwace

Regulations 1/32 Nsr Classic's

Recommended Posts

2016 NSR Classic Regulations

 

AXLES FRONT:

1.Original front axle.

2.Must be located in original, un-modified front axle holders.

3.Side play may be adjusted by adding axle washers.

4.wheels must be inside the guards.

 

AXLES REAR:

1.Original rear axle bushings only.

2.Must be located in the original, un-modified rear axle holders.

3.NO BALL BEARINGS.

4.wheels must be inside the guards.

 

BODY:

1.NSR Classic body only.

2.Painted liveries are allowed. Numbers have to be in at least places on the body.

3.Srew posts can be sleeved for extra support to prevent breakages.

4.If the car comes with the dummy spare wheel it must remain in the car as it come.

 

CHASSIS:

1.Only the NSR classic chassis for the make of car be used (Porsche to Porsche etc.)

2.Adding weight to any part on top of the chassis inside the car is allowed.

3.Reinforcing or gluing parts of the chassis such as axle bushings, motor mounting posts etc. is allowed.

4.No chassis magnets are allowed.

 

GEARS:

1.NSR GEARS ONLY. Gear ratio is 11/32.

 

GROUND CLEARANCE:

1.Day light must be seen.

 

GUIDE:

1.Any wood track guide.

 

INTERIOR:

1.Original un-modified interiors must be in place at all times.

 

MOTOR:

1.Un-modified small can shark 20,000rpm motors only (comes standard in all NSR classic cars).

2.Side winder set up only.

3.The motor may be glued or taped in.

4.The motor tabs must remain intact. Any tampering will result in disqualification.

5.Motor labels must be intact. Orange 20,000rpm.

 

WHEELS/TYRES FRONT: (NO Silicon)

1.Any front tyre.

2.Sanding/truing tyre is permitted.

3.tyres must touch the track surface. Allowance will be made as these cars released the fronts do not always touch the set up board.)

4.Original rims only.

 

WHEELS/TYRES REAR: (NO Silicon)

1.FOAM TYRES ONLY....NSR PART NUMBERS 9024 AND 9025/SLOT IT/SCALEAUTO SC-2009P

2.Sanding/Gluing and truing is allowed.

3.TYRE TREATING, SOFTENING OR CONDITION OF ANY KIND IS NOT ALLOWED.

4.Cleaning with Shellite ONLY is allowed.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×
×
  • Create New...