Jump to content
Sign in to follow this  
wwwace

Regulations 1/32 Scalextric Gt (Magnet)

Recommended Posts

2016 SCALEXTRIC GT MAGNET RULES (AMATEUR ONLY) Rules also apply for kids under 14

 

THIS IS A MAGNET RACED CLASS. MAXIMUM DOWNFORCE READING ON THE MAGNET MARSHALL WILL BE 350.

NOTE YOU CAN ONLY RUN 1 MAGNET,BUT CHANGING OF MAGNET IS ALLOWED AS LONG AS IT FITS IN ORIGINAL

POSITION AND DOSNT EXCEED 350 DOWNFORCE.

 

NO HIGH IMPACT CARS ALLOWED IN THIS CLASS.

 

AXLES FRONT. (Front wheels can exceed .5 of a mm out side the guard on either side of original set up)

1. Original front Axel set up.

2.Must be located in original, unmodified front axle holders.

3.Side play may be adjusted by adding axle spacers.

 

AXLES REAR. (Rear wheels can exceed .5 of a mm out side the guard on either side of original set up.)

1.Original rear axle and bushings only. NO BALL BEARINGS.

2.Must be located in the original ,unmodified rear axle holder.

3.Side play may adjusted by adding washers.

 

BODY.

1.Original unmodified Scalextric GT style bodies are allowed.

2.Rear wings must be mounted in original position before the start of a race. They also can be mounted with rubber supports to help prevent wings breaking off. Must remain in original position.

3.The windows must remain original and clear at all times.

4.The body must not be altered in any way and must have a .5mm ground clearance of the track surface.

5.Any screws may be used. Screws may be left loose.

6.Light shave of body is allowed to stop body catching on chassis.

7.Posts can be sleeved for more support and strength to prevent breakages .

8.Painted liveries are allowed as long as all parts are used and 3 numbers are in place on the car.

 

CHASSIS.

1.Only the original unmodified Scalextric GT style chassis is allowed.

2.Adding weight to any part on top of the chassis inside the car is allowed.

3.Gluing of bearings and gluing motor in is allowed.

4. Slight shave of the chassis is allowed to top from catching on the body.

5.Post holes can be opened up to stop screws catching.

 

GEARS.

1.Original plastic drive gear.

2.Original drive gear.

 

GROUND CLEARANCE.

1. 0.5mm clearance under hole chassis.

 

GUIDE.

1.Original guide.

2.Any lead wire.

3.Any braid.

 

IINTERIOR.

1.Original unmodified interiors in place at all times.

 

MOTOR.

1.Original Scalextric 18,000 rpm motors only.

2.The sealed motors can not be tampered with in any way.

3.Motors can be glued or taped in.

4.Resistors can be removed.

5.Lights can be removed or disconnected.

 

WHELLS/TYRES FRONT.

1.Original Scalextric only. Truing and gluing is allowed.

2.The front wheels must touch the flat surface when placed on the set up board.

3.Original rims only.

 

WHEELS/TYRES REAR.

1.Original Scalextric tyres and the only replacement is MJK. Gluing and truing is allowed.

2.Original rims only.

3.TYRE TREATING, CONDITIONING OR SOFTENING IS NOT ALLOWED. Tyre shore hardness may be checked against original packet standard tyres.

 

 

Some of the eligible cars for this class.

Aston Martin (NO pro performance car)

Audi r8 LMS

Dodge Viper

Ferrari 330

Ferrari F430,F430 GT,F430GTR,and F430 GT2.

Ford GT .

Honda NSX

Jaguar XKR,XKRS and GT3

Lamborghini Gallardo

Maserati MC12

Maserati Cambiocorsa

McLaren MP4 12C

McLaren 722 GT

Mercedes SLR

Mercedes GT1 Lemans

Nissan GT-R

Nissan Skyline

Nissan 350Z

Porsche GTR3

Porsche 997 GT3/ with exception of the Flying Lizard which has a 20,000rpm motor.

Toyota Supra

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×
×
  • Create New...