Jump to content
Sign in to follow this  
martinpc

Hay Bale

Recommended Posts

hay bale making.

you will need raffia ribbon

balsa or mdf {i used 8.5x75x915 balsa wood}

school glue or pva

sharp knife

cotton and needle

081_zps116379b0.jpg

you need to split the raffia ribbon with the knife , easy to do in small sections

082_zpsa35c3ce1.jpg

once you get a good pile cut to 2cm

next cut balsa wood to 2.5cm long by 1.3cm wide or the size you wan't

083_zps97c49d50.jpg

on the narrow side cover with glue and place a clump of cut raffia on the glue and push down flat

repeat for the over side and let dry for a while

once dry cut flat to the balsa wood

then glue the larger side and repear the process

when this is dry glue and stick the ends

let dry again and trim up, should be starting to look like a hay bale

then wrap cotton around, and tie off

run a few beads of glue around the sting dry again

finished ,pain full i know but there all ready to glue on the track

084_zps44552bdb.jpg

 

round bales

raffia

double sided tape around 2cm wide

glue

cardboard strips{breaky box} 2cm x 14 cm

085_zps2068f8c3.jpg

cut your srands of raffia around3 cm this time

stick to one side of the double tape around 20cms of tape

086_zps325db465.jpg

roll your carboard into the size circle you want the bails at ,i did under 2cm circle

peel the other side of the tape of and rap around

cut to size all the sides

glue a pile of off cuts to top and bottom

cotton around and all done

 

087_zpsb68f34b4.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...