GAS41T Posted March 29, 2018 Report Share Posted March 29, 2018 Excellent, I want to do the same!!! Quote Link to comment Share on other sites More sharing options...
Benno Posted March 29, 2018 Report Share Posted March 29, 2018 Caddo ... How about 3 x DPDT ( dual pole dual throw ) switches ? We can just wire them directly in the lane wiring between controller point & track Quote Link to comment Share on other sites More sharing options...
kalbfellp Posted March 30, 2018 Report Share Posted March 30, 2018 Connection point is correct but he only wants one switch. Quote Phil https://www.hobartminiaturecarclub.com/ Email Link to comment Share on other sites More sharing options...
Caddo Posted March 30, 2018 Report Share Posted March 30, 2018 Benno, 1 switch to rule them all......ideally anyway Quote Link to comment Share on other sites More sharing options...
kalbfellp Posted April 7, 2018 Report Share Posted April 7, 2018 (edited) Wiring for 3 Lane relays reversing using one switch to activate 3 relays. The relays go in the wiring that goes to each lane. The power for the relay coils can be from track supply is you use 12v relays. These are double pole double throw Relays. This is my 4 Relay reversing box. I used some old industrial relays that I had around at the time. I will draw up and take some pics of a Rotary Switch in the next few days. Edited April 7, 2018 by kalbfellp Quote Phil https://www.hobartminiaturecarclub.com/ Email Link to comment Share on other sites More sharing options...
Caddo Posted April 14, 2018 Report Share Posted April 14, 2018 Thanks for your efforts Phil I'll use the diagrams & pics to wire up my track switch Much appreciated, Caddo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.