Jump to content

supercharged

Members
  • Content Count

    99
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by supercharged

  1. I'm ready if anyone drops out, different car this year.
  2. They have a battery in the chassis so if there is a derail, cameras are still running(you'ld burn the guts out of the camera running on track power, camera only runs on 3.5-5vlts). If they went into production you would definitely put a smaller camera in a better position. This was just for a laugh for a house class and to see if they would fit into a 1/32. They do take a fair bit of punishment though, same gear they use in drones.
  3. Yeah Andrew, you took to them like a duck to water. Definitely an advantage if you fly drones. Not going to be for everyone, but might bring in some young blood.
  4. Here's some more pics, the view through the FPV headset. Shell Falcon. Jack Daniels Holden. Rear post. Front post. John,I just used 5 minute arildite to glue posts in.
  5. Hello John, yeah they are all scaley bodies, but with some modifications. On the Falcon and Commodore, I had to move the front wheel arches back about 4-5mm to fit the chassis', then I flared the guards to accommodate the width, the Chevy Nascar almost fitted perfect so I didnt bother modifying it. Patto's stickers all round. I put the mabuchi style motor in so I could fit the battery for the camera and transmitter that's in the car. I wanted to have it so that all cars have the same chassis, I can put any body on any chassis. Each car has over 40 channels to choose from. Hello Grant, surprisingly, its not as expensive as you may think, buy a new car ,camera ,transmitter, battery FPV(goggles) for about $200. Cheaper than some other makes out there and easier.
  6. Here's a few more photo's. This is what it looks like from above. This is a view from the FPV. This photo is taken of the TV screen with a receiver so the marshalls can watch as well.
  7. I haven't posted any pics for a while, so I hope I can still remember. Anyway, it started as a cheap house class on those cheap Ebay chassis'. I dont know if anyone has tried this, but it is a lot of fun. Cheers.
  8. Very cool, I'm gunna have to get me one of those. Well done again.
  9. Its all good, if thats the rules then thats the rules! I will bring it(tyre cleaner stuff) over next time and we can check it out and maybe do a comparison. But the rules are the rules and thats the end of story I suppose.
  10. Sorry guys, as you can see(cant see) pbucket up to their tricks. Anyway, it was a photo of the bottles of Scaleauto Tyre cleaner and Scaleauto Slot GripTyre cleaner. Cheers.
  11. I've used both of these and there is no comparison with wd40 or the likes. I just use it to clean my tyres exactly the way I've seen the guys using shellite or lighter fluid. I reckon if you ban one ,ban them all and just use tape, simple! Is there anybody else out there that has used either?
  12. Hey Vito, I dont know about the viking clap, but you can get the canberra clap around the corner! Hope to see you guys there. Safe trip.
  13. Yeah, she was a bit chaotic wasn't it? I thought it was demolition derby night. I had two cars in the panel beaters and paint shop last night, they're all good and ready to go again. I think I might put some air bags in my cars and wear my body armour and helmet next time. Those outside lanes ends up with all the carnage in them and you have to have good peripheral vision. All in good fun though, had a ball.
  14. What I was trying to say is that we all have different skill levels, mine runs out when I put the car on the track, thats when the other guys come into their own. As for the interior, I just took inspiration off the ones that the guys have already done( I think they call it plagurism, something like that!) Cheers.
  15. Hey Steve, when you say better than some other efforts you've seen, then you want me to make you one where's your effort mate! . That's gunna cost you double. I'm not going to lie, but I was intimidated when I first got the package, but I had two things in my favour,1: Time and 2:Patience(yeah right) Luckily I done a 1:32 slotworx and I knew what I was in for. Like they say "the first time is the hardest". Remember the saying "measure twice cut once", well I measured and measured again then when I was confident, I measured again and again. After the Falcon first then the Commodore they got easier. Still not saying they are easy. Anyway, just wanted to say that. Cheers.
  16. Thanks guy's, yeah kart68 I had it over at way2fast the other week. This is the interior for the commodore.
  17. I love those utes, especially the toyota.
  18. Couple more pix. Good guys, Dark side, another one Cheers.
  19. Here's couple of cars I've done, and another one, interior, Cheers.
  20. WTF? It looked nice and neat when I was writing post, now it looks like a dyslexic person wrote it. Anyway, numbers down left side are part numbers!
  21. I had a bit of a look and come up with this collection of MJK's that should fit. Like caddo said earlier, Rims: 16.5 Major step(E) , 14.0 Minor step© , 5.0 Step width(F) , 10.0 Rim width(D). Tyre sizes are (A) for OD of tyre and ( tyre width. Part # (E) © (F) (D) (A) ( 4205 16.8 14.6 5.3 11.0 20.8 11.0 4206 16.8 14.6 5.3 11.0 19.0 11.0 4213 15.6 13.6 5.2 8.0 19.7 10.3 4219 16.6 14.2 5.3 8.1 19.5 9.5 4232 16.0 13.4 5.2 8.3 19.7 12.0 4259 16.0 13.6 5.5 8.6 21.3 10.0 4265 16.8 14.6 5.3 11.0 20.0 11.0 4266 17.3 14.6 5.0 10.0 20.8 11.0 I put a set of 4205's on one of mine and they fit well. This might make it easier for ya's. Cheers.
  22. Hello Andrew, cool track. Have you heard about the braid yet? Does a truck fit under those bridges, knowing how much you love your trucks ?
  23. Are you using waterslide or peel'n'stick decals? I went back to peel'n'stick decals, and don't have a problem with them "frying" like I had with waterslide. But if I did use waterslide ,put Testors on first then enamel clear coated them .
×
×
  • Create New...