Jump to content

wscc

Auslotters
  • Content Count

    52
  • Joined

  • Last visited

Community Reputation

0 Neutral

About wscc

  • Rank
    Kart Driver

Previous Fields

  • Country
    Australia
  • How did you find us?
    email
  1. wscc

    Departing Ways

    Hi guys. It's us Rick and Mary Ann here. We're just dropping a note to say thanx for all the support you guys gave us and the friendships that were offered, while we were managing wscc. We're just here to address any rumors that may be floating around. We left wscc of our own accord due to differences in opinion, and I, Mary Ann, finally got a REAL job that is actually paying me. So we're doing great, enjoying our free time on the weekends, and until further notice we're retired from the slot car game...but be warned, when the fever hits we'll be back on track, pun intended, and raring to go. To all our friends and regulars, thanx. If there is anyone wishing to contact us please email us through kingricko@hotmail.com Bye for now.
  2. From my experience, guys that spray paint and do panel beating for a living are quite good at painting hard plastic bodies. Most of the drag guys here use what ever they have at the shop for their cars, I must admit that house of kolor have awesome effects. their candies are amazing on slot cars, that's if you wanna pay $80 for 100ml, I think that's trade prices too.
  3. Hi! Our sunday racing has been starting at about 2pm, and the official sunday racing will begin this sunday 2nd april. It's primarily grp 10 racing, not so strict on bodies, all within reason. no high end motors etc. come along and see ...we're more relaxed, competitive but fun.
  4. WE HAVE NEW REGULATIONS FOR GROUP 10. IT'S MORE USER AND BEGINNER FRIENDLY. SEASON STARTS ON SUNDAY 2ND APRIL. TRACK IS OPEN FOR TEST AND TUNE FROM 1PM. WE HAVE CHANGED THE START TIME. IT WILL NOW START AT 2PM SHARP, PLEASE ALLOW AT LEAST 10 MINUTES FOR SCRUTINEERING. CAR CATEGORY REGULATIONS BODY -Lexan bodies only, no hard plastic. -Choose your body, choose your speed. (Choice of body will depend on the individual) CHASSIS -Any Parma, Champion, JK, Mossetti or RJR Group 10 pressed steel type chassis. -All original dimensions, mounting points and basic configuration must be retained with the following exceptions: Plating maybe removed to facilitate soldering. Motor bracket maybe removed or modified. Motor maybe soldered in position. Wire motor brace maybe added to support motor. Front axle maybe soldered in place or braced to prevent axle rotation. Maximum front axle diameter is .062 Front wheel retainers maybe substituted and/or soldered in place Body tape maybe used to hold lead wires in places Original body clips must be used Weight maybe added REAR AXLE -Any solid 1/8 or 3/32 -Oilite type bushings only, maybe soldered or glued in plate. GEARS -Any 48 or 64 pitch spur gears PINION -Any 48 or 64 pitch  MOTOR -Any unbalanced or balanced 16D motors. -Any full C-can sized motors up to super wasp motors -Must use all original hardware including endbell, brush hoods, buss bars and spring posts. -Endbell and hardware may not be modified in any way with the exception of honing the brush hood to fit “Big Foot†motor brushes in case of 16 motors. -Endbell hardware screws and endbell to can mounting screws maybe added and/ or substituted. -Can may not be modified except for the following: Notching for axle clearance Removal of plating to facilitate soldering motor in position Oilite hole maybe be centred Oilite type bushing only- maybe soldered and/or glued in position Any Motor Brushes maybe used with the exception of preshunted brushes. Any brush springs maybe used Shunt wire and spring insulation are not allowed Magnets maybe re-magnetized. ARMATURE -Spacers and commutator truing are permitted -Any unbalanced or balanced 16D type -Any unbalanced or balanced minimum diameter 0.512 up to super wasp -No Group 12 allowed. WYNNUM SLOT CAR CENTRE 31 PROPRIETARY ST TINGALPA QLD 4173 PHONE: 07 3890 8901
  5. wscc

    April 8 Race Day

    CAR CATEGORY REGULATIONS BODY -Lexan bodies only, no hard plastic. -Choose your body, choose your speed. (Choice of body will depend on the individual) CHASSIS -Any Parma, Champion, JK, Mossetti or RJR Group 10 pressed steel type chassis. -All original dimensions, mounting points and basic configuration must be retained with the following exceptions: Plating maybe removed to facilitate soldering. Motor bracket maybe removed or modified. Motor maybe soldered in position. Wire motor brace maybe added to support motor. Front axle maybe soldered in place or braced to prevent axle rotation. Maximum front axle diameter is .062 Front wheel retainers maybe substituted and/or soldered in place Body tape maybe used to hold lead wires in places Original body clips must be used Weight maybe added REAR AXLE -Any solid 1/8 or 3/32 -Oilite type bushings only, maybe soldered or glued in plate. GEARS -Any 48 or 64 pitch spur gears PINION -Any 48 or 64 pitch  MOTOR -Any unbalanced or balanced 16D motors. -Any full C-can sized motors up to super wasp motors -Must use all original hardware including endbell, brush hoods, buss bars and spring posts. -Endbell and hardware may not be modified in any way with the exception of honing the brush hood to fit “Big Foot†motor brushes in case of 16 motors. -Endbell hardware screws and endbell to can mounting screws maybe added and/ or substituted. -Can may not be modified except for the following: Notching for axle clearance Removal of plating to facilitate soldering motor in position Oilite hole maybe be centred Oilite type bushing only- maybe soldered and/or glued in position Any Motor Brushes maybe used with the exception of preshunted brushes. Any brush springs maybe used Shunt wire and spring insulation are not allowed Magnets maybe re-magnetized. ARMATURE -Spacers and commutator truing are permitted -Any unbalanced or balanced 16D type -Any unbalanced or balanced minimum diameter 0.512 up to super wasp -No Group 12 allowed. WYNNUM SLOT CAR CENTRE 31 PROPRIETARY ST TINGALPA QLD 4173 PHONE: 07 3890 8901 HERE'S A HELPFUL HINT FOR ANYONE WISHING TO RACE EITHER ON SUNDAYS (SEASON STARTS 2ND APRIL) OR ON THE 8TH.
  6. wscc

    April 8 Race Day

    If there are any questions in regards to any of the classes please feel free to email us on wynnum_slot_car_centre@hotmail.com Scrutineering will happen approximately 10 minutes before each race. Our rules and regulations will be slightly different now to the ones on the our site, as those rules are about a year out of date. But current rules will be available if you wish to get a copy of it. All we want is for people to come along and have fun. Test out our track and new SRT system. If you win we'll give you a prize. Be ready for the race of you life.
  7. For the moment I'm not having any more kids, hehe. I must save and save like there's no tomorrow. I must find myself, my hubby and my kids a home....of our own ...haha
  8. wscc

    Scale Electric

    They have arrived. They old and dusty and hmm...to me just look old i'll get them on my digital asap
  9. wscc

    April 8 Race Day

    WSCC WYNNUM SLOT CAR CENTRE Saturday April 8 2006 Classes: Mini’s /Womps: 13D’s Flexi’s : Group 10’s & 13D’s Plafit :true to scale Wing cars: Boxstock 12’s &15’s Each heat will run 8 x 3minutes sprints. Scrutineering will take place 10mins before each race. Regulations available before the day or prior to racing. Cost: $7 per car/ packages available for 3 or more cars. Prizes given to 1st, 2nd and 3rd. Racing starts at 2pm. (Sharp) Hours: Mon-Tues CLOSED Wed 4-9pm Thus 4-11pm Fri 4-12am Sat & Sun 12-7pm WYNNUM SLOT CAR CENTRE, 31 PROPRIETARY ST, TINGALPA QLD 4173 PHONE: 07 3890 8901 (IF OUT OF HOURS PLEASE FEEL FREE TO LEAVE A MESSAGE) :( if anyone is interested please come along
  10. My shoes are my children and I dearly love them so. They are my treasured, precious little things that I adore and swear to protect. I vow not to have any children so that I can concentrate on my kids now. hahaha
  11. Well I should put in what I would do if I had one million. spend 250k on a unit in brisbane to live in and pay off any debts I have (not all incurred during deranged shoe expeditions) 300k towards land acerage *100k towards a slot car centre tracks, drag strip parts and a bed to sleep in (late nights here at the centre has definitely made a sleep impression) 50k to my parents 100k in the bank 100k towards a trip round the world 100k incase we stuff up with anything hehe Of course I'll get an allowance for shoes....hehe.
  12. I am first and foremost a girl and a girl will leave a guy for the love of shoes. Haven't you watched sex and the city. haha
  13. I ventured out to the big boy world of a model/hobby shop and found some display cases that might be of some use.
  14. Sunday racing will all depend on what cars people bring along. We're going to try and accomodate most people. For the moment the classes that will be running are: Group 10 Flexi's And depending on numbers: WOMPS PLAFIT WING CARS If we can run about 6 people minimum we are able to run a race.
  15. Hi guys! We're starting a new season for the circuit next week. We have been trialing a Sunday meet, starts at roughly 1pm, test and tune from 12.30. It's taking off and we're inviting anyone in the area to come along and test your driving abilities. New comers and oldies welcome. The season will begin on the 2nd April. Come along and sign up! If there are any plafit racers wanting to race on the sunday please come along and give it ago. If there's a field, there's a race. Thursdays will be taking off from the 30th of March. This you can come along and try out the new system. Thanx. And see you there.
×
×
  • Create New...